Category Archives: DIY Decorations

Christmas Cheer

It’s the most beautiful time of the year! It’s Christmas!

Love and laughter fills the air; lights on the street are as beautiful as the stars in the sky, lined in different colours and different shapes!

As a kid, I remember, it was that time to be extra good so that dear Santa will deem it fit to drop me a gift. 

Winter wonderland was a thing to look forward to; The roller-coasters, the music and the food; the energy around everything compels you to let loose.

Ice skating in the snow with friends and family…

And best of all, making the snow man  and having snowball fights, the fun gets you to disregard how cold the snow really is at least for a while. 

When you go outside.. It almost seems like the bells are singing the Christmas hymns .. or maybe it’s just me hearing the lovely choir from far away. 

It’s the day families come together some to tease one another. And then my favourite part; time to unbox the gifts I’m sure many kids would be left wondering how somehow Santa almost always got their wishes for gifts right year after year. Well, it’s all part of the mystery of the season.

Then there’s always the time for amazing games, followed by a reflection on how the year has been, and then plans and prayers are made for the year to come. 

Christmas season is always fun. There are things to be enjoyed and moments to be created. I’m sure this Christmas would be any different. I wish you many cheers folks. Merry Christmas!

Floating Christmas Candles

Floating Christmas Candles

Is your room missing something for the huge party you’re making this Christmas? HAVE NO FEAR! The cutest fillers will brighten up your entire party and set the mood just right!


  • Little Vanilla Scented Tea Light Candles
  • Glass Containers any shape or size
  • Cranberry Sprigs
  • Glitter
  • Water


  1. Fill the glasses with glitter and the cranberry sprigs
  2. Fill it with water
  3. Place candle on top of water
  4. Light the candle


Rustic Hanging Tree

Rustic Hanging Tree

This is the definition of a hipster decoration. Super beautiful and SIMPLE. This hanging tree will transform an entire room into something chic and very very photogenic.


  • Six old pieces of tree wood
  • Fairy lights
  • Pinecone
  • Any greenery *pine tree leaves look best*
  • Drill
  • Nails


  1. Drill pieces of wood into wall with even space in between each piece
  2. Place fairy lights on in a very sporadic manner
  3. Leave some greenery and pinecones sitting on the pieces of wood

Yarn Tree Deco

Yarn Tree Deco

This Yarn Tree Decoration adds festivity to any room of the house! It’s a fun way to brighten up a dull corner or can even be used as a centerpiece!


  • Yarn
  • Glue
  • Glitter
  • Large Thick Paper
  • Plastic Little Snowflakes


  1. Wrap the large piece of thick paper into a cone shape and glue the edges.
  2. Let it sit and wait out at least a half hour until it’s dry
  3. Drizzle glue all over the outside of the paper cone
  4. While the glue is still wet on the outside of the cone, wrap around a bunch of the yarn in an uneven pattern going up and down all over the cone
  5. Put some optional glitter on as well as the plastic snowflakes.
  6. Wait until dry then carefully disconnect the paper from the yarn


Santa Chair Covers





-11⁄2 yd. Red fleece (makes 2 chair covers)

-Basic sewing supplies


-3 yds. Boa or white fur trim

-Sewing machine


-Red thread

-Pattern paper

-Fabric glue


  1. Measure width and depth of chair back. Add 2″ to width for seam allowance and ease
  2. To create pattern: On pattern paper, use width measurement plus 2″ (from step 1). 30″ high at center”; straight sides at 13” – more if the chair back is particularly tall  These measurements include a 1/2″ seam allowance
  3. Use pattern to cut four fleece pieces.
  4. With right sides facing each other, sew two hat pieces together along the straightand angled sides. Trim corners and turn
  5. Sew 2″ hem at bottom
  6. Glue trim on bottom of hat
  7. For the pompom, cut a 12″ piece of boa, fold in half, tie a loose knot, then sewor glue ends of the knot together. Sew or glue pompom to point of hat.

This craft is sure to keep your guests sitting in your chairs for hours and hours. Your party will never end!

Plastic Spoon Tree




  • Paper Mache Christmas Tree form
  • Plastic Spoons
  • Spray Paint
  • Hot Glue


  1. I started by buying bunches of spoons from Target (equally god from the Dollar Store, but cheap where ever you go), then cut the tops off. I tried just breaking them off, but lots of the split.
  2. Once I had about 100 cut, I layed them outside on paper face down and sprayed them with a variety of different spray paints. I didn’t want it to be even so Krylon (usually crappy and uneven) worked great to give texture.
  3. I did the back first to practice my technique and perfect the coloring. I ended up using a combination of two browns, chalkboard black, and gold.
  4. After they were all dry, I began gluing them onto the paper mache form starting at the bottom using hot glue.
  5. I varied the spacing on the different layers so that the spoons alternated on the layers. And I kept on working my way up to the top til it was done! Super EASY!!





Shoutout to for this funky craft!

Wine Bottle Lights



Wine Bottle Lights

This craft will transform any simple room into a party room and make sure your guests leave “WOW-ED” 🙂


  • Sponge
  • Drill
  • Piece of Wood
  • Bottle stopper
  • Clay
  • Sandpaper
  • Fairy Lights


  1. Gather your wine bottles. The wine bottles you use can be different shapes, and sizes, but try to choose bottles that have distinctive, fun labels. You can choose to keep the labels on bottles, or you can remove the labels.
  2. Clean the wine bottles. Wash your bottles thoroughly with hot, soapy water and allow the bottles to dry completely. The hot, soapy water might cause the labels to peel off from the bottles. You can leave the labels on the bottles if you prefer, or peel them off for a sleeker look. If you decide to take the labels off the bottles, make sure to remove the label glue with some adhesive eliminating spray.
  3. Build a jig. While you wait for the wine bottles to dry, build a base (jig) where you can place the bottle, and hold it steady while you drill. Use a 2×8 piece of wood, and lay it lengthwise on a flat surface. Screw in a 12 inch piece of wood about a quarter of the way from the edge of the 2×8. This piece of wood is going to be used as a parting stop. Lay a bottle on the 2×8 piece of wood against the first piece of parting stop, and place another parting stop on the other side of the bottle. Hold that parting stop in place and take away the bottle. Then scoot the parting stop in a little bit closer to the already attached parting stop. Drill the second piece of parting stop like you did the first piece. The idea behind the jig is to hold the bottle securely, so it doesn’t roll away as you’re drilling into it.
  4. Drill a hole for the bottle stopper. Drill a hold in the center of the jig base to hold the bottle stopper. You want your hole to be able 1.25 inches deep. To get the right drill hole, consider using the Forstner drill bit. You want the hole to be deep tight enough so the stopper stays still as you drill it, but loose enough so you can easily remove the bottle stopper. This stopper will be used later to keep the string of lights secured in the bottle.
  5. Drill the stopper. Insert the stopper into the hole in the middle of the jig. Attach the 5/16 inch drill bit into the drill. Center the bit on the stopper, turn on the drill press, and drill through the stopper. You want to drill a hole completely through the stopper. When you are finished drilling, you will most likely have to twist off the stopper from the drill bit. Don’t try to drill the stopper without the jig holding it in place. You will most definitely hurt yourself trying to drill it by holding it with your hands.
  6. Cut the stopper. Pull the stopper from the jig, and use a box knife to slice the stopper from the top of the hole to the bottom, with the point of the knife right inside the stopper hole. The cut makes sure that once we are ready to secure the cord of lights, the lights can slide in the opening and be tightly secured by the stopper.
  7. Mark your drilling spot on the bottle. Look to drill somewhere on the back of the bottle near the bottom. Consider applying a piece of masking tape to the spot you plan to drill. The tape will help keep the drill from slipping and help to prevent the glass bottle from splintering near the drill site.
  8. Make a lubricating water reservoir. Roll a piece of clay into a rope approximately 4 inches long and about ½ inch in width. Then connect the ends of the clay to form a circle. This circle will serve as a little water reservoir to lubricate the drilling hole and glass as you drill. Surround the area you decided to drill with the clay, and press it into the bottle to seal the reservoir. You might also consider making a pocket (a thick pancake shape) of plumber’s clay, and drilling through the clay you drill. If you decide to drill this way, you must slowly pour water onto the bottle as you drill your hole so the drill doesn’t over heat the bottle and cause it to splinter and crack.
  9. Prepare the drill lubricant. Fill up a squeeze bottle with some cold tap water. Squirt some water into the clay water reservoir. This cold water mitigates the heat created from drilling the glass. If any water starts to leak out from the water reservoir, seal it by pushing the clay harder onto the bottle. You will have to consistently pause drilling, add water to the reservoir, and continue on with the drilling process.
  10. Drill the hole in the bottle. Before you start drilling, put on your protective gloves and glasses. It’s also advisable to wear long sleeve shirts when drilling glass. Use a hand drill with a ½ inch diamond bit, or glass and tile bit, to drill your hole. Place the bottle onto the jig so it stays put while you drill the hole. Hold the drill vertically straight, and start the drill. Lower the drill until it just barely comes in contact with the surface of the bottle. As you start cutting the glass, glass dust will dust up the water reservoir, making it cloudy. Continue drilling, pushing down ever so slight onto the drill. Eventually (after about 20 or 30 seconds), the water in the reservoir will start to leak and drip into the inside of the bottle. This means that you are almost completely broken through the glass. Once you have drilled through the bottle, pull the drill out from the hole and turn off the drill.
    • It is very important that you don’t force the drill through the glass. Too much downward pressure could make the bottle to crack.
  11. Check your drilling work. Look around the drill site for fractures in the bottle. If you see any cracks, you might want to discard the bottle, as it will be very fragile and potentially dangerous. Remove the clay lubricant reservoir and empty the contents of the bottle into the garbage. If the drilled out glass disc isn’t in the bottle, it’s probably stuck in the drill bit. If that’s the case, try to pry it out with a paperclip edge.
  12. Sand the drilled hole. Use sandpaper to file down the sharp edges created by drilling the hole into the bottle. Then rinse the bottle with water to wash out any glass bits, and allow the bottle to dry again. 150 grit paper will sufficiently smooth out the rough edges of the hole.
  13. Insert the lights into the bottle. Remove the decoration lights from the box, and pull the lights taut so they can lay straight. Check to make sure the string of lights work by plugging them into an outlet. If the lights light up and are working correctly, insert the first bulb on the string in through the hole that you drilled out. Continue inserting the lights one by one, being sure to keep the outlet plug remaining outside the bottle. To help fit the light bulbs through the hole more easily, push the light against the cord, and push both through at the same time. Be careful not to cut the lights cord on the edges of the hole. You might have to turn the bottle upside down in order to move the lights inside the bottom “up” to make room for the rest of the lights entering through the base of the bottle.
  14. Secure the lights with a stopper. Once you’ve finished feeding the lights into the bottle, wrap the stopper around the remaining strand hanging from the outside of the bottle, and insert the stopper into the hole.
    • The stopper will protect the cord from being cut by the raw glass edges of the hole and keep the lights inside the bottle.